Dyslipidemia may impact initial recovery following arthroscopic rotator cuff repair: a retrospective study.

BACKGROUND: The current literature shows that dyslipidemia can lead to a higher incidence of rotator cuff tears (RCTs) and an increased retear rate after repair. We aimed to evaluate the influence of preoperative dyslipidemia on postoperative pain, patient-reported outcomes (PROs), active range of motion (ROM), and structural integrity. METHODS: A cohort of 111 patients who underwent arthroscopic RCT repair between January 2021 and July 2022, and whose complete preoperative serum lipid data were available within one week prior to surgery was retrospectively reviewed. Dyslipidemia was defined as the presence of an increase or decrease in at least one blood lipid profile (triglycerides, total cholesterol, low-density lipoprotein, high-density lipoprotein, or non-high-density lipoprotein). There were 43 patients in the dyslipidemia group and 68 in the ortholiposis group. Patient evaluations, including pain score, PROs, and ROMs, were conducted preoperatively; at 3 and 6 months postoperatively; and at the last follow-up. Structural integrity was assessed by magnetic resonance imaging (MRI) 6 months after surgery if possible, and Sugaya type 4 or 5 was considered a retear. Propensity score matching (PSM) was used to reduce bias. RESULTS: The RCT size, surgical technique, preoperative pain status, PROs, and active ROM were comparable between patients with dyslipidemia and those with ortholiposis. Three months after surgery, patients in the dyslipidemia group had worse average PROs (Constant score: P = 0.001; ASES score: P = 0.012; UCLA score: P = 0.015), forward flexion (P = 0.012), and internal rotation (P = 0.001) than patients in the ortholiposis group did. The difference between the two groups persisted after PSM but disappeared at the sixth month after surgery. No significant differences in pain score, PROs, or active ROMs were detected between the dyslipidemia and ortholiposis groups after a mean follow-up of 24 months. Of the 72 patients who underwent MRI, 4 retears (5.6%) were found, and all were in the ortholiposis group. There was no difference in the rate of retears between the two groups (P = 0.291) or with (P = 0.495) PSM. CONCLUSIONS: In conclusion, we found that perioperative dyslipidemia may impact initial recovery within the first 3 months following arthroscopic rotator cuff repair but may have no effect on pain, PROs, or active ROMs at a mean 2-year follow-up or rotator cuff integrity at 6 months postoperatively. Trail registration Retrospectively registered.

Effects of Extracorporeal Shock Wave Therapy in Patients with Mild-to-Moderate Carpal Tunnel Syndrome: An Updated Systematic Review with Meta-Analysis.

BACKGROUND: Carpal tunnel syndrome (CTS) is the most common entrapment syndrome, primarily affecting women between the ages of 40 and 70, and conservative treatments are the first option for mild-to-moderate CTS. However, the comparisons between extracorporeal shock wave therapy (ESWT) and other non-surgical methods in the treatment of mild-to-moderate CTS remain controversial, and an updated systematic review is needed. METHODS: An electronic search was performed, and all available articles until August 2023 were included in the analysis. The overall quality of evidence was assessed by the GRADE approach. Meta-analyses were conducted using Manager V.5.3.3. Pooled effect sizes were expressed as the weighted mean difference (WMD) with 95% confidence intervals (CIs). RESULTS: A total of 19 RCTs were included. Low-level quality evidence showed that ESWT outperformed the control intervention in terms of functional improvements, pain relief, electrodiagnostic parameters, and cross-sectional area of the median nerve at any time point of follow-up. Compared to local corticosteroid injection (LCI), there were statistically better improvements in functional improvements, pain relief, and electrodiagnostic parameters at 3 and 6 months of follow-up. CONCLUSIONS: There is low-level quality evidence to show that both fESWT and rESWT are more clinically effective than controls in symptom relief, functional enhancement, and electrophysiologic parameters' improvement for patients with mild-to-moderate CTS at any time point of follow-up. Compared with LCI, ESWT yielded similar short-term (<1 month) but better medium- (1-6 months) and long-term (>6 months) improvements in pain relief and functional recovery with fewer potential complications.

SLS 3D Printing To Fabricate Poly(vinyl alcohol)/Hydroxyapatite Bioactive Composite Porous Scaffolds and Their Bone Defect Repair Property.

Poly(vinyl alcohol) (PVA) exhibits a wide range of potential applications in the biomedical field due to its favorable mechanical properties and biocompatibility. However, few studies have been carried out on selective laser sintering (SLS) of PVA due to its poor thermal processability. In this study, in order to impart PVA powder the excellent thermal processability, the molecular complexation technology was performed to destroy the strong hydrogen bonds in PVA and thus significantly reduced the PVA melting point and crystallinity to 190.9 °C and 27.9%, respectively. The modified PVA (MPVA) was then compounded with hydroxyapatite (HA) to prepare PVA/HA composite powders suitable for SLS 3D printing. The final SLS 3D-printed MPVA/HA composite porous scaffolds show high precision and interconnected pores with a porosity as high as 68.3%. The in vitro cell culture experiments revealed that the sintered composite scaffolds could significantly promote the adhesion and proliferation of osteoblasts and facilitate bone regeneration, and the quantitative real-time polymerase chain reaction results further demonstrate that the printed MPVA/20HA scaffold could significantly enhance the expression levels of both early osteogenic-specific marker of alkaline phosphatase stain and runt-related transcription factor 2. Meanwhile, in in vivo experiments, it is encouragingly found that the resultant MPVA/20HA SLS 3D-printed part has an obvious effect on promoting the growth of new bone tissue as well as a better bone regeneration capability. This work could provide a promising strategy for fabrication of PVA scaffolds through SLS 3D printing, exhibiting a great potential for clinical applications in bone tissue engineering.

[Mid-term effectiveness of arthroscopic Bankart repair in treatment of recurrent anterior shoulder dislocation].

Objective: To investigate the mid-term effectiveness of arthroscopic Bankart repair for recurrent anterior shoulder dislocation. Methods: The clinical data of 107 patients with recurrent anterior shoulder dislocation who met the inclusion criteria between January 2017 and June 2021 was retrospectively analyzed, and all patients underwent arthroscopic Bankart repair. There were 88 males and 19 females. The age of the primary dislocation ranged from 13 to 48 years (mean, 23.3 years). The number of preoperative dislocations was 2-160 times (median, 7 times). The duration of preoperative instability was 0.2-240.0 months (median, 36.0 months). The mean age at operation was 28.2 years (range, 16-61 years). There were 43 cases of left shoulder and 64 cases of right shoulder. The proportion of glenoid defects in 63 patients was 1.7%-16.1% (mean, 8.1%). MRI showed that none of the patients had rotator cuff tears or shoulder stiffness. The CT three-dimensional reconstruction was performed at 1 day after operation to evaluate the distribution of implanted anchors and the occurrence of glenoid split fracture and whether there were nails pullout at the implant site. The postoperative complications were observed, and the pain and function of the shoulder were evaluated by visual analogue scale (VAS) score, Rowe score, Constant-Murley score, and American Shoulder and Elbow Surgeons (ASES) score. The recurrence of instability, the results of apprehension test, the number of patients who returned to preoperative sports level, and the satisfaction rate of patients were recorded. Results: All patients were successfully operated and were followed up 20-73 months (mean, 41.5 months). All incisions healed by first intention. The CT three-dimensional reconstruction at 1 day after operation showed that the anchors were located at the 2 : 00-5 : 30 positions of the glenoid, and there was no glenoid split fracture or nails pullout at the implant site. At last follow-up, VAS score was significantly lower than that before operation, and Rowe score, Constant-Murley score, and ASES score were significantly higher than those before operation ( P<0.05). Seven patients (6.5%) had recurrence of anterior shoulder dislocation at 23-55 months (mean, 39.9 months) after operation, including 6 cases of dislocation and 1 case of subluxation. At last follow-up, 51 patients (47.7%) returned to preoperative sports level, and 11 patients (10.3%) had a positive apprehension test. The patients' satisfaction rate was 90.7% (97/107). Among the 10 patients who were not satisfied with the surgical effectiveness, 7 patients had postoperative recurrence of instability, and 3 patients felt that they did not return to preoperative sports level. Conclusion: Arthroscopic Bankart repair has good mid-term effectiveness in patients with recurrent anterior shoulder dislocations, minimal or no glenohumeral bone defects and low sports need.

Biceps Tenodesis Better Improves the Shoulder Function Compared with Tenotomy for Long Head of the Biceps Tendon Lesions: A Meta-Analysis of Randomised Controlled Trials.

PURPOSE: Surgical options for long head of the biceps tendon (LHBT) lesions include tenotomy and tenodesis. This study aims to determine the optimal surgical strategy for LHBT lesions with updated evidence from randomised controlled trials (RCTs). METHODS: Literature was retrieved from PubMed, Cochrane Library, Embase and Web of Science on 12 January 2022. Randomised controlled trials (RCTs) comparing the clinical outcomes of tenotomy and tenodesis were pooled in the meta-analyses. RESULTS: Ten RCTs with 787 cases met the inclusion criteria, and were included in the meta-analysis. Constant scores (MD, -1.24; p = 0.001), improvement of Constant scores (MD, -1.54; p = 0.04), Simple Shoulder Test (SST) scores (MD, -0.73; p = 0.03) and improvement of SST (p < 0.05) were significantly better in patients with tenodesis. Tenotomy was associated with higher rates of Popeye deformity (OR, 3.34; p < 0.001) and cramping pain (OR, 3.36; p = 0.008]. No significant differences were noticed between tenotomy and tenodesis regarding pain (p = 0.59), American Shoulder and Elbow Surgeons (ASES) score (p = 0.42) and its improvement (p = 0.91), elbow flexion strength (p = 0.38), forearm supination strength (p = 0.68) and range of motion of shoulder external rotation (p = 0.62). Subgroup analyses showed higher Constant scores in all tenodesis types and significantly larger improvement of Constant scores regarding intracuff tenodesis (MD, -5.87; p = 0.001). CONCLUSIONS: According to the analyses of RCTs, tenodesis better improves shoulder function in terms of Constant scores and SST scores, and reduces the risk of Popeye deformity and cramping bicipital pain. Intracuff tenodesis might offer the best shoulder function as measured with Constant scores. However, tenotomy and tenodesis provide similar satisfactory results for pain relief, ASES score, biceps strength and shoulder range of motion.

BC-PROM: validation of a patient-reported outcomes measure for patients with breast cancer.

Key issues of treatment for patients with breast cancer such as patient satisfaction with treatments, compliance, and some side effects are essential for evaluating quality of life by patient-reported outcomes in clinical trials. The study aimed to develop and evaluate a specific patient-reported measure which included physical, psychological, social, and therapeutic domain for assessing the survival of patients with breast cancer.The pool of items was drafted after a theoretical revision and cognitive interviews with women with breast cancer. The draft scale was formed after the adjustment of the items and dimensions, and the selected items were submitted to expert's judgments. Five statistical methods were used to select these items by 2 validation samples. The final scale was administered to a sample of 417 patients from 8 hospitals and 135 controls for reliability, validity, and responsive analyses.The final BC-PROM consisted of 52 items, 13 subdomains, and 4 domains, being developed after preexamination and formal examination. Cronbach alpha coefficient was 0.902 and 0.712 for the full scale and therapeutic domain. The structural validity results showed that the multidimensional measurement of the scale fulfilled expectations. Differences in the BC-PROM mean scores were significant between cancer patients and healthy participants in 13 subdomains (P < .05), indicating good responsiveness. Among the sample survey of patients, the scale copy acceptance rate was 98.2%, completion rate 94.6%, and average filling time 10 minutes.The new and reliable BC-PROM was developed in patients with breast cancer and applied to clinical treatment evaluation and clinical trials for such patients.